BFL-3 Model 50-6535
Flange mount, non-pressure, direct drive mixer. Flange drum lid mounting or closed top mounting on vessels to 800 gallons. Mixing viscosities up to 5,000 centipoise in 55 gallon vessels, lighter viscosities in larger vessels. Dual opposing propellers provide efficient liquid turnover.
Air Drive (shown)
- 1 HP air motor, 3/8" NPS-M inlet air connection, muffler and speed control
- Air Requirements: 10-16 cfm @ 70psi
- 6" diameter flange and gasket
- Speed Range: 0-3000 rpm
- Stainless steel coupling
- Stainless shaft 5/8" x 27" long
- Dual stainless steel 6" triple blade propeller
- Weight: 18 lbs
- *Type FFL-3/ Model 50-6535-6: 2 HP Flange Mount
- *Type FFL-3/ Model 50-6535-8: 3 HP Flange Mount
Electric Drive
- 1/4 to 2 HP (determined by application)
- TEFC, EXP, Washdown, paint free ratings
- 110v to 220v 1ph, 50 or 60 Hz
- Standard: 1725 rpm @ 60 Hz, 1425 @ 50 Hz
- Variable speed DC or AC-PWM available
- Stainless steel shaft coupling
- Stainless shaft 5/8" x 27" long
- Dual stainless steel 6" triple blade propeller
- Weight: depends on motor size & configuration
Options
- Custom shaft lengths, prop sizes & configuration
|
|
|
S-75 ANSI Heavy Duty Gear Reduction Mixers
Heavy duty gear drive, flange mount, pressure and non-pressure operation for mixing liquids to 100,000 centipoise in vessels up to 60 gallons, medium viscosities in vessels up to 1,200 gallons. Shaft seals for pressure or vacuum operation. Double sealed bearings in flange do not require lubrication.
Air Drive (shown)
- 1/2 to 5 HP air motor driven models, inlet air connection, muffler and speed control
- 5:1, 10:1, and 20:1 reducers available
- Stainless ANSI flange sizes, model dependent, from 3" to 10"
- Stainless shaft, 1", 1 1/4" diameter, model dependent, to 120" long
- Stainless 24" wide paddle
- Shaft seal for vacuum or 125/ 150 psi pressure operation
- Weight: 110 lbs
Electric Drive
- 3/4 to 3 HP (determined by application)
- TEFC, EXP, Washdown, paint free ratings
- 110v to 220v 1ph, 50 or 60 Hz, 230, 380, 460 3ph, 50 or 60Hz
- Standard: 1725 rpm @ 60 Hz, 1425 @ 50 Hz
- Variable speed DC or AC-PWM available
- Stainless ANSI flange sizes, model dependent, from 3" to 10"
- Stainless shaft, 1", 1 1/4" diameter, model dependent, to 120" long
- Stainless 24" wide paddle
- Shaft seal for vacuum or 125/ 150 psi pressure operation
- Weight: depends on motor size & configuration
Options
- Custom shaft lengths, prop sizes & configuration
|
|
|
S-75 ANSI Light Duty Gear Reduction Mixers
Light duty dear drive, flange mount, pressure and non-pressure operation for mixing liquids with viscosities to 10,000 centipoise in vessels up to 25 gallons light viscosities in vessels up to 1,000 gallons. Shaft seals for pressure or vacuum operation. Double sealed bearings in flange require no lubrication.
Air Drive
- 1/2 HP air motor, inlet air connection, muffler and speed control
- 8:1 gear reduction unit for speed range 0-350 rpm
- Stainless ANSI flange sizes, model dependent, from 2" to 10"
- Stainless shaft, 5/8" or 3/4" diameter, model dependent, to 75" maximum
- Stainless propeller of paddle, model dependent
- Weight: 35 lbs
Electric Drive
Options
- Custom shaft lengths, prop sizes & configurations
|
|
|
S-75DD ANSI Direct Drive Flange Mixers
Heavy Duty C-Clamp mount, adjustable angle, direct drive mixer for mixing heavy viscous liquids in vessels up to 800 gallons and light viscosities in vessels up to 1200 gallons.
Air Drive
- 1/2 to 5 HP air motor drive, inlet air connection, muffler and speed control
- Speed Range: 0-3000 rpm
- Stainless ANSI flange sizes from 1 1/2" to 10"
- Stainless shaft, model dependent, 3/8" to 1 1/4" with lengths to 75" maximum
- Stainless propeller, model dependent, from 3" to 10"
- Shaft seal for vacuum or 125/ 150 psi pressure operation
- Weight: 35 lbs
Electric Drive
- 1/4 to 3 HP (determined by application)
- TECP, EXP, Washdown, paint free ratings
- 110v to 220v 1ph, 50 or 60 Hz, 230, 380, 460 3ph, 50 or 60Hz
- Standard: 1725 rpm @ 60 Hz, 1425 @ 50 Hz
- Stainless shaft, model dependent, 3/8" to 1 1/4" with lengths to 75" maximum
- Shaft seal for vacuum or 125/ 150 psi pressure operation
- Weight: depends on motor size & configuration
Options
- Custom shaft lengths, prop sizes & configurations
|
|
|
|
