ADR-3 Model 50-6787
Bung entering, screw mount, direct drive mixer for mixing liquids up to 2,000 centipoise in 55 gallon vessels. Collapsible 4" propellers reduce to 2" for entry into a drum and opens to 4" when shaft is turning.
Air Drive (shown)
- 1/2 HP air motor, 1/4" NPS-M inlet air connection, muffler and speed control
- Air requirements: 4-10 cfm @ 70 psi
- Speed Range: 0-3000 rpm
- Heavy duty bung adapter with locking ring
- Stainless steel shaft coupling
- Stainless steel shaft 5/8" x 27" long
- Stainless steel 4" collapsible paddle/ propeller
- Weight: 10 lbs
Electric Drive
- 1/4 to 1 HP (determined by application)
- TEFC, EXP, Washdown, paint free rating
- 110v to 220v 1 ph, 50 or 60 Hz, 230, 380, 460 3 ph, 50 or 60 Hz
- Standard: 1725 rpm @ 60 Hz, 1425 rpm @ 50 Hz
- Variable speed DC or AC-PWM available
- Stainless steel shaft coupling
- Stainless steel shaft 5/8" x 27" long
- Stainless steel 4" triple blade propeller
- Weight: varies (depending on motor size & configuration)
Options
- Custom shaft lengths, prop sizes & configurations
|
|
|
ACDR-3 Model 50-6911
Bung entering, clamp mount, direct drive mixer for mixing liquids up to 2,000 centipoise in 55 gallon vessels. Collapsible 4" propeller to 2" for entry through the drum bung opening and opens to 4" when the shaft is turning
Air Drive
- 1/2 HP air motor, 1/4" NPS-M inlet air connection, muffler and speed control
- Air Requirements: 4-10 cfm @ 70 psi
- Speed Range: 0-3000 rpm
- Heavy Duty clamp mount support
- Stainless steel shaft coupling
- Stainless steel shaft 5/8" x 29" long
- Stainless steel 4"
- Weight: 15 lbs
Electric Drive
- 1/4 to 1 HP (determined by application)
- TEFC, EXP, Washdown, paint free rating
- 110v to 220v 1 ph, 50 or 60 Hz, 230, 380, 460 3 ph, 50 or 60 Hz
- Standard: 1725 rpm @ 60 Hz, 1425 rpm @ 50 Hz
- Variable speed DC or AC-PWM available
- Stainless steel shaft coupling
- Stainless steel shaft 5/8" x 29" long
- Stainless steel 4" collapsible paddle/ propeller
- Weight: varies (depending on motor size & configuration)
Options
- Custom shaft lengths, prop sizes & configurations
|
|
|
|
